Hearth and Home Technologies SL-350TRS-CE-D LOG #6 (SRV540-704):

Heat & Glo • SL-350TRS-CE-D • 2033-900 Rev. N • 10/07
38
Placing the Ember Material
Ember material is shipped with this gas fireplace. The bag
labeled Glowing Ember (050-721) is standard glowing ember
material. To place the ember material:
• Remove latches and tension springs around the glass door.
• Remove the glass door from the unit (Figure 44).
• Place small pieces of ember material on burner top around
burner ports (Figure 33). Do NOT press embers into
burner ports. Cover the top of the burner with a single
layer of ember material. Do NOT place embers behind
the rear port row as noted in Figure 45.
• Save the remaining ember materials for use during fireplace
servicing.
• Replace the glass door and a front trim door on the unit
(see Replacement Parts Section of the manual.)
• Replace the latches and tension springs.
Figure 45. Placement of the Ember Material
Figure 44. Glass Assembly
LATCHES
(BOTH TOP
AND BOTTOM)
GLASS
ASSEMBLY
LOG #6 (SRV540-704): Place log #6 against the second and third grate bars.
If sooting occurs, the logs might need to be repositioned slightly to avoid excessive flame impingement.
66
DO NOT PLACE EMBERS BEHIND THE REAR BURN ER PORTS.