Brinkmann 9620 owner manual Step

Door Hinge Pin Holes

Front

Back

Choose a good, cleared assembly area and get a friend to help you put your grill together. Lay cardboard down to protect grill finish and assembly area.

CAUTION! Some parts may contain sharp edges. Wear protective gloves if necessary.

Step 1

Attach cart base to side panels. Insert four M6 X 12 mm bolts (black) and M6 star washers (black) through cart base and into legs and tighten securely. Be sure the door hinge pin holes face forward.

Step 2

Attach back panel to legs using four M6 X 12 mm bolts (black).

Step 3

Attach the upper door bracket using four M6 X 12 mm bolts (black).

Step 4

Use two M4 self-tapping screws (black) to attach the rear cart brace/ tank heat shield to rear legs. Heat shield will rest on upper door bracket.

24