Step 16
Press the two raised points on the back of the bezel into the corresponding holes on the side burner front panel. Then, firmly seat the valve nozzle into the burner venturi. Hold in place while you perform Step 17.
Side Table Holes
Side |
|
| |
Burner |
| Step 17 | |
Valve |
| ||
| Burner Venturi | Insert the two screws that are | |
| already attached on the side burner | ||
|
| valve through the corresponding | |
|
| key holes on the side burner front | |
|
| panel and bezel, from the back of | |
|
| the side burner front panel. | |
|
| Depending on the side burner | |
Valve |
| valve, you will be using either the | |
Nozzle |
| outside key holes (Figure 1), or the | |
|
| inside key holes (Figure 2). Pull the | |
|
| valve downward or upward to lock | |
Figure 1 | Figure 2 | into place. Then tighten the two | |
screws. | |||
|
|
| WARNING: Never use your grill |
| without leak testing all |
| gas connections and |
| hoses. See the section |
| on "Leak Testing" in |
| this manual for proper |
| procedures. |
Side Burner |
|
Grate |
|
| Step 18 |
Side Burner | Install the side burner control knob |
Control Knob | onto valve stem. |
Bezel |
|
| 28 |
