WARNING

FILLING THE LP GAS CYLINDER:

•Allow only qualified LP gas dealers to properly fill or repair your LP gas cylinder.

•New tanks should be purged prior to filling; inform LP gas dealer if you are using a new tank.

•DO NOT allow the cylinder to be filled beyond 80% capacity. Over-filled tanks can create a dangerous condition. Over-filled tanks can build-up pressure and cause the relief valve to expel propane gas vapors. The vapor is combustible and if it comes in contact with a spark source or flame an explosion causing severe burns, bodily harm, or death could occur.

•Always use a protective cylinder cap when grill is not connected to cylinder.

•If you exchange a cylinder with a qualified exchange program, be sure the cylinder has a Type 1 valve and an over-filling prevention device (OPD).

INSTALLING THE LP GAS CYLINDER ONTO THE GRILL:

1.Check that the cylinder valve is closed by turning the knob clockwise.

2.Place the cylinder into the tank holder in the bottom of cabinet.

3.Orient the cylinder such that the valve opening faces the side burner, and so that the hose is not kinked or damaged.

4.Lift tank lock wire to secure cylinder into tank holder.

5.Attach or detach regulator to the LP gas cylinder only when cylinder is at rest in tank holder.

HOSE AND REGULATOR:

Your grill is equipped with a Type 1 connection device with the following features:

1.The system will not allow gas flow from the cylinder until a positive connection to the valve has been made.

Note: The cylinder valve must be turned off before any connection is made or removed.

2.A thermal device that will shut off the gas flow if the device is subject to temperatures above 240°F to 300°F (115°C to 150°C). If this should happen, remove the entire regulator assembly and dispose of properly. A replacement regulator assembly can be purchased by contacting customer service at 800-527-0717. The cause of the excessive heat should be determined and corrected before using your grill again.

3.A regulator flow limiting device, when activated, restricts the flow of gas to 10 cubic feet per hour. If the flow limiting device is activated, perform Regulator Resetting Procedure .

Tank Holder

REGULATOR RESETTING PROCEDURE

1.Turn burner control knobs to "OFF", turn off the cylinder valve and disconnect regulator from LP gas tank. Wait approximately two minutes.

2.Reattach regulator and slowly turn cylinder valve back on. The flow limiting device will now be reset.

6

Page 6 Page 8
Page 7
Image 7
Brinkmann Madison Filling the LP GAS Cylinder, Installing the LP GAS Cylinder Onto the Grill, Hose and Regulator
Page 6 Page 8

Madison specifications

Brinkmann Madison is a premium outdoor grill that has gained popularity among barbecue enthusiasts and culinary experts alike. Known for its exceptional build quality and user-friendly features, the Madison model captures the essence of outdoor cooking with a combination of advanced technologies and classic design elements.

One of the most notable features of the Brinkmann Madison grill is its robust construction. Made from high-quality stainless steel, the grill offers durability and resistance to rust and corrosion. This ensures that it can withstand the rigors of outdoor use and the elements, while maintaining a sleek and polished appearance. The grill’s heavy-duty lid is another key characteristic, designed to retain heat and smoke, which enhances the flavors of the food being cooked.

Equipped with multiple burners, the Madison model boasts even heat distribution, allowing for precise temperature control, essential for various cooking techniques. Whether you are searing steaks, roasting vegetables, or smoking meats, this grill accommodates diverse culinary styles. The burners are designed for quick ignition, typically featuring an electronic ignition system for easy start-up. This convenience makes the Brinkmann Madison accessible to both beginners and seasoned grill masters.

The cooking surface of the Madison is expansive, offering ample space for multiple dishes. It's constructed with heavy-duty cast iron grates that provide excellent heat retention and create perfect grill marks on your food. Additionally, these grates are designed for easy cleaning, making maintenance a simple task after a long day of grilling.

Another essential feature is the built-in temperature gauge located on the lid. This allows users to monitor the internal heat without lifting the lid, preventing heat loss and ensuring optimal cooking conditions. The Brinkmann Madison also incorporates side shelves that offer extra prep space, making it easier to marinate, season, or prepare ingredients prior to grilling.

For those who enjoy outdoor entertaining, the Madison's sleek build and versatile cooking capabilities make it a centerpiece of any backyard gathering. With its emphasis on durability, functionality, and ease of use, the Brinkmann Madison promises to elevate every outdoor cooking experience, enabling users to create memorable meals and lasting memories. Overall, it stands out as a robust, reliable, and stylish choice for outdoor grilling enthusiasts.
Top Page Image Contents