WARNING
TRANSPORTING AND STORAGE:
•Never move a grill when it is hot or when objects are on the cooking surfaces.
•Make sure that cylinder valve is shut off. After moving the grill check that all gas connections are free of leaks. Check the venturi tubes to ensure they are properly connected to the valves and the orifices are inside the venturi tube.
Follow the instructions listed below.
BEFORE STORING YOUR GRILL:
•Ensure that the fuel supply tank valve is fully closed.
•Clean all surfaces.
•Lightly coat the burners with cooking oil to prevent excess rusting.
•If storing the grill indoors, disconnect the LP tank and leave the LP tank OUTDOORS.
•Place a protective cap cover on the LP tank and store the tank outdoors in a well ventilated area out of direct sunlight.
•If storing the grill outdoors, cover the grill with a grill cover for protection from the weather. A grill cover can be purchased by contacting:
The Brinkmann Corporation at
CLEANING AND MAINTENANCE:
•For safe grilling and peak performance of your grill, perform these checks at least twice per year or after extended periods of storage.
HARDWARE
•Be sure to tighten up all hardware (nuts, bolts, screws, etc.) at least twice per year.
CASTINGS
•Remove the cooking grids, ceramic briquets, and burner from inside your grill. Use a brush with hot water and detergent to remove excess residue. NEVER use a commercial oven cleaner. Rinse com- pletely with water. Towel dry and replace all components as described in the assembly instructions.
13
