NOTE: Inside view of Lower Grill Housing

Venturi Tubes

Inside view of Lower Grill Housing

Burner

Bottom - Outside view of Lower Grill Housing

Step 18

Mount lower grill housing onto upper grill frame using four M6 X 35 bolts and M6 X 5 hex nuts.

Step 19

Remove four bolts from burner supports on bottom of burner. Insert the grill burner into the lower grill housing by sliding Venturi tubes through the large square opening in the bottom of the housing. The gas collector and electrode should face towards the front of the grill. The Venturi tube ends should fit over the valve manifold ends. The holes on manifold have been offset for proper installation.

NOTE: Manifold will have offset holes and can only be installed by aligning holes in manifold with holes in control panel.

Venturi Tubes

Step 20

Secure burner to lower grill housing using the four bolts that were removed previously from the burner in Step 19.

24

Page 25
Image 25
Brinkmann Outdoor Gas Grill owner manual Venturi Tubes