Step 10
Rest lid on the body and align hinge holes, then thread hood pivot pins through hood and into grill body. Insert cotter pins into hood pivot pins and bend ends out slightly.
Step 11
Attach two air vent covers to the inside of lid and body. Place air vent cover on the inside of the unit with the adjustment tab sticking through one of the air vent holes. Using 6 x 12mm screw and nut, secure vent cover to the unit. Do not overtighten the nut as this will make the vent difficult to open and close.
Step 12
Insert crank through front of grill body and into crank bracket. Rotate clockwise until crank engages charcoal grate.
Cotter Pin
Hood Pivot Pin
6 x 5mm Nut
6 x 12mm
Phillips Hex Bolt
7
