Child Seat Functions
Child Seat Functions
Chest Clip
Fastening the Chest Clip
Fasten the chest clip by pushing the two halves together until a positive click is heard (Fig. A).
Releasing the Chest Clip
1Squeeze the middle tabs together (Fig. B).
2Pull the two pieces apart.
Adjusting the Chest Clip
1Slide the chest clip up or down (Fig. C) on the harness so it is positioned at the middle of the child’s chest, level with the child’s armpits.
2Slide the HUGS™ chest pads and comfort pads to a comfortable location for the child.
A
B
Harness Buckle
Fastening the Harness Buckle
1Hold the harness buckle with one hand.
2Use your other hand to insert one buckle tongue at a time into the harness buckle (Fig. D).
•A proper connection is confirmed with a positive click after inserting each buckle tongue.
Releasing the Harness Buckle
1 Brace the rear of the harness buckle with one hand.
2 Use your thumb to press the release button and slide both buckle tongues to remove from the buckle (Fig. E).
IMPORTANT: Periodically clean the harness buckle to ensure safe operation (page 37).
D
x
2 
E
HUGS™ Chest Pads
WARNING! HUGS™ chest pads must be installed for
C
Adjusting Harness Slot Height
IMPORTANT: See Important Harness Adjustments on pages
1Loosen the harness by lifting the harness adjuster lever while pulling the harness straps forward as F
far as possible (Fig. F).
2From the rear of the child seat, unhook the shoulder harness from the harness yoke (Fig. G).
3Pull the harness straps through the shell, foam, and cover to the front of the child seat.
4Thread the harness straps through the appropriate harness slots in the cover, foam, and child seat G shell (Fig. H).
5Reattach the harness straps to the harness yoke (Fig. G).
6Pull the
7Verify that all straps are threaded at the same
height and are not twisted. | H |
|
30 | 31 |
