3. INSTALLATION (CONT’D)
3.8INSTALLING THE TANDEM® TRANSITION KIT (CONT’D)
3.8.4 CONNECTING TANDEM® TRANSITION TO THE DUAL EXTERIOR HOOD (CONT’D)
2.Join the end of the Tandem® transition to the rear of the exterior backplate. Secure with 2 Xmas tree pins and seal properly with duct tape.
Xmas tree pin |
VD0085 |
CAUTION
The exterior backplate must be installed with the word “TOP” pointing upward.
3.Using 4 #8 x 1¼” screws, mount the the exterior backplate to the exterior wall. Seal the outline with caulking.
VD0086 |
4.Snap the assembled exterior hood on its backplate and secure with 2 provided screws (#8 x 1¼” long).
VD0087 | screw |
- 15 -
