6.CHOOSE THE OPENING(S) (INTERNAL BLOWER HOODS ONLY)
Remove the knockout for the chosen opening(s) (horizontal at the back of the hood or vertical on top). See illustrations below.
VERTICAL DISCHARGE
HORIZONTAL DISCHARGE
NOTE: For ducted installation only.
1 
2 
3
1 
2 
3
HR0021
Punch out the appropriate electrical knockout hole on top (A) or back (B) of the hood. Install the wire clamp (included in parts bag).
NOTE: For a
A | B |
HR0024 |
|
7. HORIZONTAL DISCHARGE INSTALLATION (INTERNAL BLOWER(S) ONLY)
All internal blower hoods are factory shipped with the blowers mounted for a vertical discharge configuration. For a horizontal discharge configuration, disassemble the blower(s) from the inner top of the hood and mount it (them) to the back panel of the hood. The procedure below applies for one or two motors.
Unplug the blower.
Using a 5/16” socket, remove all blower mounting screws from the inner top of the hood. Keep the screws for further use.
HE0085
LEFT SIDE MOUNTING
SCREW LOCATION
HD0269
RIGHT SIDE
MOUNTING SCREW
LOCATION
HD0282
- 9 -
