Broan QP130SS, QP130WW, QP130BLC Prepare the Hood, Vertical Ducting, Horizontal Ducting, IN. Round

MODELS QP130BL • QP130BLC • QP130SS • QP130SSC QP130WW • QP130WWC • QP136BL • QP136SS • QP136WW

2	Use the proper diagram below, for placement of
	ductwork and electrical cutout in cabinet or wall. For a
	non-ducted installation, DO NOT cut a duct access hole.

*Note the extra wood shim and mounting screw near the cabinet front, 4-7/8” to the right of the cabinet center line.

				3¼” X 10”
HOOD MOUNTING SCREWS (5)				VERTICAL DUCTING
115/8" (30" hood)			115/8" (30" hood)
145/8" (36" hood)			145/8" (36" hood)
CABINET FRONT				47/8" *
CABINET				81/2"
BOTTOM			5¼"
	5¼"			23/8"	107/8"
4½" ¾"	VERTICAL DUCT
	ACCESS HOLE
				25/8"
WOOD SHIMS				ELECTRICAL
	CENTER			ACCESS HOLE
(recessed-bottom				(in cabinet bottom)
		LINE
cabinets only)

WOOD SHIMS				3¼” X 10”
(recessed-bottom		HORIZONTAL DUCTING
cabinets only)
	CABINET FRONT		1½"
	47/8" *		3/	8"

CABINET 4"	HORIZONTAL DUCT
	ACCESS HOLE
BOTTOM	5¼"	5¼"

115/8" (30" hood)			8½"
		115/8" (30" hood)
145/8" (36" hood)
		145/8" (36" hood)
HOOD
	CENTER		ELECTRICAL
MOUNTING
SCREWS (5)	LINE		ACCESS HOLE
			(in wall)
HOOD MOUNTING SCREWS (5)			7-IN. ROUND
115/8" (30" hood)			DUCTING
		115/8" (30" hood)
145/8" (36" hood)		145/8" (36" hood)
		47/8" *
8" DIA.
HOLE		8½"
7-IN. ROUND
				107/8"
	DUCT		23/8"
45/8"	ACCESS
	HOLE		25/8"
			ELECTRICAL
			ACCESS HOLE
			(in cabinet bottom)

Page 3

PREPARE THE HOOD

3Remove parts bag from inside the foam packaging end cap.

4Remove all protective polyfilm from the hood (stainless

steel hoods only).

	è
	(1)
(2)	PULL
	DOWN
LIFT	ALUMINUM
OUT	FILTERS

5 Remove the Aluminum Filters from the hood.

DAMPER /

DUCT CONNECTOR

6 Remove 2 screws holding Damper / Duct Connector to hood. Remove damper/duct connector from inside the

hood.

FOR DUCTED INSTALLATIONS - Skip to Step 9.