Broan QP242BC Prepare The Hood, Aluminum Filters, FOR DUCTED INSTALLATIONS - Skip to Step, Page

MODELS QP230BC • QP230BL • QP230SS • QP230WW

QP236BC • QP236BL • QP236SS • QP236WW

QP242BC • QP242BL • QP242SS • QP242WW

Page 4

PREPARE THE HOOD

SCREWS

3	Remove parts bag
	from inside the
	foam packaging
	end cap.

4	Remove all
	protective polyfilm
	from the hood
	(stainless steel
	hoods only).
5	Remove the
	Aluminum Filters
	from the hood.

		ç
		(1)
(2)	ç	PULL
		DOWN
LIFT
		ALUMINUM
OUT
		FILTERS

NON-DUCT

PLATE

	NON-DUCT
	PLATE
SLOT	ç

6 Remove 6 Screws holding Bottom Pan to hood. Set bot- tom pan and screws aside.

NON-DUCT

PLENUM

DAMPER /

DUCT CONNECTOR

7 Remove 2 Screws holding Damper / Duct Connector to hood. Remove damper/duct connector from inside the

hood.

FOR DUCTED INSTALLATIONS - Skip to Step 12.

NON-DUCT

DIVERTER

8 NON-DUCTED INSTALLATION ONLY:

From parts bag: Attach Non-Duct Diverter to Air Box with 2 Screws and 2 Washers.

9 NON-DUCTED INSTALLATION ONLY:

Remove 2 Screws holding Non-Duct Plate to Non-Duct Plenum and remove plate.

SCREWS

NON-DUCT

PLATE

10NON-DUCTED INSTALLATION ONLY:

Insert short end of Non-Duct Plate into Non-Duct Plenum Slot. Attach with 2 Screws removed in Step 9.

11NON-DUCTED INSTALLATION ONLY:

Purchase a set of (2) non-ducted filters for 30” wide hoods (Model BPPF30) & 36” wide hoods (Model BPPF36) or a set of (3) non-ducted filters for 42” wide hoods (Model BPPF42) from your local distributor or retailer. Attach the non-ducted filters to the aluminum mesh filters following instructions packed with the non-ducted filters.

FOR NON-DUCTED INSTALLATIONS - Skip to “INSTALL THE HOOD”.