Broan RMP1 manual Connect Ductwork, NON-DUCTEDRECIRCULATION Filter Installation

CONNECT DUCTWORK

Ducted configuration

1.Take the discharge collar and assemble it onto the hood’s discharge opening, pressing slightly.

2.Use 6" round metal duct to connect the discharge collar on the hood to the ductwork above.

3.Use duct tape to make all joints secure and air tight.

Non-ducted recirculation configuration

1.Connect a 6” round metal duct to the discharge opening so that the air is sent outside the cabinet and sent back into the room.

2.Use duct tape to make all joints secure and air tight.

DUCTED CONFIGURATION

6” ROUND

METAL DUCT

DISCHARGE

OPENING

DISCHARGE

COLLAR

NON-DUCTED RECIRCULATION CONFIGURATION

6” ROUND METAL DUCT

DISCHARGE

OPENING

NON-DUCTEDRECIRCULATION

FILTER INSTALLATION

1.Position the filters over the blower.

2.Rotate to lock filters in place.

3.Purchase replacement filter packs (contains 2) from your dealer.

Part No. B03300487.

NON-DUCTED

RECIRCULATION FILTERS

- 6 -