Broan WC26I Halogen Bulbs, Fuse Replacement, eration on the appliance, CAUTION Bulb may be hot

HALOGEN BULBS

This range hood requires two halogen bulbs (Type JC, 12Volt, 20Watt Max, G-4 Base).

WARNING: Always switch off the elec- trical supply before carrying out any op-

eration on the appliance.

To change bulbs:

1.Open the cover by prying from the proper slots. Fig. 2.

2.Remove the bulb by pulling sideways. (DO

NOT ROTATE).

! CAUTION: Bulb may be hot.

3.Replace with Type JC, 12Volt, 20 Watt Max, G-4 Base halogen bulb. Do not touch replacement bulb with bare hands!

! CAUTION: Use of bulbs greater than 20 watts will cause the fuse to open.

FUSE REPLACEMENT

IF LIGHTS FAIL TO OPERATE, DISCON- NECT POWER AT THE SERVICE EN- TRANCE. CHECK THE FUSE AND RE- PLACE IF NECESSARY.

1.Remove the decorative flue.

2.Open the fuse box. Fig. 3.

3.Unscrew the cap from the fuse holder and remove the fuse.

4.Replace the fuse with the same size and amperage (5 x 20mm, 4 amp, 125 volt).

! CAUTION: Use a fuse greater than 4 amps may damage the transformer.

5.Reinstall the fuse holder cap.

6.Reconnect power at the service entrance.

FIG. 2

FUSE

FUSE BOX

FIG. 3

- 5 -