Broan WC26I manual Non - Ducted Hoods Only, Prepare The Hood

PREPARE THE HOOD

NON - DUCTED HOODS ONLY

Note: The following materials must be purchased separately for non-ducted recirculation installations.

•

•

Non - Ducted Recirculation Kit, Model ANKWC26.

5” diameter duct.

1.Remove the tape on the electrical system plate; place the electrical system plate on the hood (use a protection). Fig.12.

2.Discard discharge collar/damper supplied with the hood. Install the 5” to 6” adapter supplied with the Non-Ducted Recirculation Kit.

3.Secure the plenum to the flue mounting bracket with (2) 3.9x6mm flat head screws (the screws are supplied with the Non-Ducted Recirculation Kit “ANKWC26”). Fig. 13.

ELECTRICAL

SYSTEM5”-6”

PLATEADAPTER

3.9x6mm	FLUE MOUNTING
FLAT HEAD	BRACKET
SCREWS

PROTECTION

FIG.12

PLENUM

FIG.13

- 11 -