Brocade Communications Systems 8770-4 quick start Safety notices

TABLE 1 Installation tasks, time, and items required (Continued)

Installation task	Time estimate	Items required
Installing an Ethernet cable, opening a	20 minutes	Ethernet cabling (optional) for Telnet access.
Telnet session, and configuring the		Refer to the Brocade Network OS
Brocade VDX 8770-4 date and time and		Administrator’s Guide.
additional system parameters. Verify and
back up configuration.
Installing transceivers as needed	30-60 minutes	Copper and optical transceivers and
		direct-attach cables as needed.
Attaching cables, cable ties, and cable	2-3 hours	Cables, cable ties, and cable management
guides		fingers.

CAUTION

The Brocade VDX 8770-4 with DC power sources are intended for installation in restricted access areas only. A restricted access area is a location where access can be gained only by service personnel through the use of a special tool, lock and key, or other means of security, and is controlled by the authority responsible for the location.

CAUTION

The Brocade VDX 8770-4 with AC power sources are intended for installation in restricted access areas only. A restricted access area is a location where access can be gained only by service personnel through the use of a special tool, lock and key, or other means of security.

Safety notices

When using this product, observe the danger, caution, and attention notices in this manual. The notices are accompanied by symbols that represent the severity of the safety condition.

NOTE

Translated safety notices are in the Brocade Product Safety Notices publication, which is on the CD-ROM that accompanies this product.

The danger and caution notices are listed in numerical order based on their IDs, which are displayed in parentheses, for example (D004), at the end of each notice. Use this ID to locate the translations of these danger and caution notices in the Brocade Product Safety Notices.

Brocade VDX 8770-4 QuickStart Guide	5 of 32
Publication Number: 53-1002554-01