Brocade Communications Systems 8770-4 Inserting an AC power supply, Inserting a DC power supply

FIGURE 8 Inserting a power supply

Inserting an AC power supply

For this procedure, refer to “ESD precautions” and Figure 8.

To replace a power supply, complete the following steps.

DANGER

High Touch Current. Earth connection is essential before connecting the power supply.

1.Unpack the new power supply and remove it from the anti-static bag.

2.Inspect the power supply for damage.

3.Ensure that the handle of the replacement power supply is pushed down.

4.Insert the power supply into the slot.

5.Rotate the handle upward to fully seat the power supply.

6.Tighten the captive screw.

Inserting a DC power supply

For this procedure, refer to “ESD precautions” and Figure 8.

18 of 32	Brocade VDX 8770-4 QuickStart Guide
	Publication Number: 53-1002554-01