276 Brocade ICX 6650 Layer 3 Routing Configuration Guide
53-1002603-01
Displaying OSPF V3 Information
Showing IPsec statistics

The show ipsec statistics command displays the error and other counters for IPsec, as this example

shows.

Source The source address consists of the IPv6 prefix and the TCP or UDP port
identifier.
Destination The destination address consists of the IPv6 prefix. Certain logical elements
have a bearing on the meaning of the destination address and its format, as
follows:
For IPsec on an interface or area, the destination address is shown as a prefix
of 0xFE80 (link local). The solitary “::” (no prefix) indicates a “do not-care”
situation because the connection is multicast. In this case, the security policy
is enforced without regard for the destination address.
For a virtual link (SPDID = 0), the address is required.
TABLE 58 SA used by the policy
Field Description
SA This heading points at the SA-related headings for information used by the
security policy. Thereafter, on each line of this part of the IPsec entry (which
alternates with lines of policy information Table 57), “SA:” points at the fields
under those SA-related headings. The remainder of this table describes each
of the SA-related items.
SPDID The Security policy database identifier (SPDID) consists of interface type and
Interface ID.
Dir The Dir field is either ‘in” for inbound or “out” for outbound.
Encap The type of encapsulation in the current release is ESP.
SPI Security parameter index.
Destination The IPv6 address of the destination endpoint. From the standpoint of the near
interface and the area, the destination is not relevant and therefore appears
as ::/0:any.
For a virtual link, both the inbound and outbound destination addresses are
relevant.
TABLE 57 IPsec policy information (Continued)
Field Description
Brocade#show ipsec statistics
IPSecurity Statistics
secEspCurrentInboundSAs 1 ipsecEspTotalInboundSAs: 2
secEspCurrentOutboundSA 1 ipsecEspTotalOutboundSAs: 2
IPSecurity Packet Statistics
secEspTotalInPkts: 19 ipsecEspTotalInPktsDrop: 0
secEspTotalOutPkts: 83
IPSecurity Error Statistics
secAuthenticationErrors 0
secReplayErrors: 0 ipsecPolicyErrors: 13
secOtherReceiveErrors: 0 ipsecSendErrors: 0
secAuthenticationErrors 0
secReplayErrors: 0 ipsecPolicyErrors: 13
secOtherReceiveErrors: 0 ipsecSendErrors: 0
secUnknownSpiErrors: 0