Brocade ICX 6650 Layer 3 Routing Configuration Guide 73
53-1002603-01
Configuring IP parameters – Layer 3 Switches
show ip dhcp-server address-pool
name
Displays a specific address pool or all address pools. Refer to “Displaying
address-pool information” on page78.
show ip dhcp-server flash Displays the lease binding database that is stored in flash memory. Refer
to “Displaying lease-binding information in flash memory” on page 79.
show ip dhcp-server summary Displays a summary of active leases, deployed address pools,
undeployed address pools, and server uptime.“Displaying summary
DHCP server information” on page 80.
bootfile name Specifies a boot image to be used by the client. Refer to “Configuring the
boot image” on page 75.
deploy Deploys an address pool configuration to the server. Refer to “Deploying
an address pool configuration to the server” on page 76.
dhcp-default-router addresses Specifies the IP address of the default router or routers for a client. Refer
to “Specifying default routers available to the client” on page 76.
dns-server addresses Specifies the IP addresses of a DNS server or servers available to the
client. Refer to “Specifying DNS servers available to the client” on
page76.
domain-name domain Configures the domain name for the client. Refer to “Configuring the
domain name for the client” on page 76.
lease dayshoursminutes Specifies the lease duration for an address pool. The default is a one-day
lease. Refer to“Configuring the lease duration for the address pool” on
page76.
excluded-address [address
|address-low | address-high]
Specifies an address or range of addresses to be excluded from the
address pool. Refer to“Specifying addresses to exclude from the address
pool” on page76.
netbios-name-server address
[address2 | address3]
Specifies the IP address of a NetBIOS WINS server or servers that are
available to Microsoft DHCP clients. Refer to “Configuring the NetBIOS
server for DHCP clients” on page 77.
network subnet/mask Configures the subnet network and mask of the DHCP address pool.
Refer to “Configuring the subnet and mask of a DHCP address pool” on
page77.
next-bootstrap-server address Configures the IP address of the next server to be used for startup by the
client. Refer to “Configuring a next-bootstrap server” on page77.
tftp-server address | name name Configures the address or name of the TFTP server available to the client.
Refer to “Configuring the TFTP server” on page77.
vendor-class [ascii | ip | hex ] value Specifies the vendor type and configuration value for the DHCP client.
Refer to “Configuring a vendor type and configuration value for a DHCP
client” on page77.
default-lease-time Specifies the duration of the lease for an IP address that is assigned from
a DHCP server to a DHCP client.
database tftp Defines the TFTP IP address server for storing the DHCP database, the
name of the stored file and the time period at which the stored database
is synchronized with the database on the device.
database ftp Defines the FTP IP address server for storing the DHCP database, the
name of the stored file and the time period at which the stored database
is synchronized with the database on the device.
max-lease-time Specifies the maximal duration of the leases in seconds.
TABLE 9 DHCP Server CLI commands (Continued)
Command Description