UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE OPC CARTRIDGE
12.NOTE: There is also a plastic stabilizer bearing for the axle located on the same side of the clutch gear which must be secured.
13.Extract the transfer roller from the car- tridge using a pair of long nose pliers. Notice
that the saddles and the helical gear will also come out. Clean the roller with compressed air or vacuum cleaner. DO NOT USE any solvent or chemicals on the transference roller.
NOTES
www.uninetimaging.com
USA
Ph:
Fx:
EUROPE
JAPAN
BRAZIL
ARGENTINA
11124 Washington Blvd., Culver City, California U.S.A. 90232 Ph: 310
© 2005 Uninet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. Uninet Imaging does not guarantee or warrant downloaded information.