Brother 1240 manual Spring loaded clutch piece at one end and a

UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE OPC CARTRIDGE

8.Pull axle out using a pair of needle-nose pli- ers.

9.Slide the axle away from the cartridge as shown.

10. When the drum is extracted there will be a	11. Do not lose these three pieces which will be
spring loaded clutch piece at one end and a	needed to assemble the cartridge even if a new
drive gear on the other side coming loose.	drum is installed.

www.uninetimaging.com

USA

Ph: +1-310-280-9620

Fx: +1-310-838-7294

EUROPE

+34-93-757-1335

+34-93-741-4166

JAPAN +81-3-44-55-2789 +1-310-838-7294

BRAZIL +55-11-4822-3033 +55-11-4822-3353

ARGENTINA +54-11-4571-2388 +54-11-4574-3706

11124 Washington Blvd., Culver City, California U.S.A. 90232 Ph: 310 280-9620 • Fx: 310 838-7294 • sales@uninetimaging.com

© 2005 Uninet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. Uninet Imaging does not guarantee or warrant downloaded information.