Brother 1240 manual Opc Cartridge

UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE OPC CARTRIDGE

OPC CARTRIDGE

1 3 2

1.With a medium size Phillips screwdriver remove the screws securing the corona wire assembly. There are two in each corner hold- ing the plastic top and one, visible thru the hole on the right hand side securing the elec- tric contact of the control grid and the clean- ing felt.

3

1

4

2

2.Press the four tabs to remove the assembly from the top of the cartridge starting from the two behind followed by the ones on each side.

3.Clean the grid surface of any toner with compressed air.

www.uninetimaging.com

USA

Ph: +1-310-280-9620

Fx: +1-310-838-7294

EUROPE

+34-93-757-1335

+34-93-741-4166

JAPAN +81-3-44-55-2789 +1-310-838-7294

BRAZIL +55-11-4822-3033 +55-11-4822-3353

ARGENTINA +54-11-4571-2388 +54-11-4574-3706

11124 Washington Blvd., Culver City, California U.S.A. 90232 Ph: 310 280-9620 • Fx: 310 838-7294 • sales@uninetimaging.com

© 2005 Uninet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. Uninet Imaging does not guarantee or warrant downloaded information.