Brother 1240 manual

UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE

4.With a small flat blade screwdriver, pry the bearing cap off the developer roller axle and the fixing post.

5.Move to the other side of the cartridge and above the white plastic hub on the gear side, locate the clip that holds the developer roller cap-bearing. NOTE: Contrary to the other bear- ing cap this one is located between the devel- oper roller and the side of the cartridge.

6.Press the clip in towards the developer roller and rotate the piece up towards the front of the toner hopper, until the bearing cap is perpendicular to the roller.

www.uninetimaging.com

USA

Ph: +1-310-280-9620

Fx: +1-310-838-7294

EUROPE

+34-93-757-1335

+34-93-741-4166

JAPAN +81-3-44-55-2789 +1-310-838-7294

BRAZIL +55-11-4822-3033 +55-11-4822-3353

ARGENTINA +54-11-4571-2388 +54-11-4574-3706

11124 Washington Blvd., Culver City, California U.S.A. 90232 Ph: 310 280-9620 • Fx: 310 838-7294 • sales@uninetimaging.com

© 2005 Uninet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. Uninet Imaging does not guarantee or warrant downloaded information.