Brother 2100 manual AC Adaptor

GETTING STARTED

AC Adaptor

1

Insert the plug on the AC adaptor cord into the connector marked DC IN 9-9.5V on the P-touch.

2

Insert the AC adaptor plug into a standard electrical outlet.

• Turn the P-touch off before disconnecting the AC adaptor.

• Do not pull or bend the AC adaptor cord.

For backup of memory when the AC adaptor is unplugged from the P-touch, please use AA-size alkaline batteries (LR6).

WARNING

•Use only the AC adaptor (AD-24) designed exclusively for your P-touch. Failure to observe this may result in an accident or damage. Brother shall not assume any responsibility for any accident or damage resulting from not using the specified AC adaptor.

•Do not connect the AC adaptor to a non-standard electrical outlet. Failure to observe this may result in an accident or damage. Brother shall not assume any responsibility for any accident or damage resulting from not using a standard electrical outlet.

CAUTION

•Disconnect the AC adaptor from the P-touch and electrical outlet when you do not intend to use the P-touch for an extended period.

•When power is disconnected for more than two minutes, all text and format settings will be cleared. Any text files stored in the memory will also be cleared.

12