Brother 2100 manual Inserting a Tape Cassette, Check that the end of the tape is not bent

Inserting a Tape Cassette

Tape cassettes of 3.5 mm, 6 mm, 9 mm, 12 mm, 18 mm width can be used in your P-

touch. Use only tape cassettes with the mark.

• If the new tape cassette has a cardboard stopper, be sure to remove the stopper before inserting the cassette.

•If the ink ribbon is loose, use your finger to wind the toothed wheel in the direction of the arrow on the cassette.

1	Check that the end of the tape is not bent and	End of tape
	that it passes through the tape guide.

Tape guide

English

2

After making sure that the power is off, lift open the tape compartment cover. If there is already a tape cassette in the machine, remove it by pulling it straight up.

13