Sharp R-890N operation manual Oven Diagram, Accessories, Never touch the grills when they are hot

OVEN DIAGRAM

			11	15
					1
					2
					3
					4
10	9	8	7	6	5
					12
14					13

16

7

1817

OVEN:

1.Liquid crystal display

2.Control panel

3.Oven lamp

4.Door opening button

5.Waveguide cover (DO NOT REMOVE)

6.Bottom grill heating element

7.Turntable motor shaft

8.Oven cavity

9.Door seals and sealing surfaces

10.Door latches

11.Top grill heating element

12.Ventilation openings

13.Outer cabinet

14.Power cord

15.Menu label

ACCESSORIES:

16.Turntable

17.High rack

18.Low rack

•Place the turntable on to the turntable motor shaft, ensuring it is located firmly.

•To avoid turntable damage, ensure dishes or containers are lifted clear of the turntable rim when removing them from the oven.

•The racks are for Grill, Mix, Convection and recommended automatic operations.

Never touch the grills when they are hot.

NOTES:

•The waveguide cover is fragile. Care should be taken when cleaning inside the oven to ensure that it is not damaged.

•After cooking fatty foods without a cover, always clean the cavity and especially the grill heating elements thoroughly, these must be dry and free from grease. Built-up grease may overheat and begin to smoke or catch fire.

•Always operate the oven with the turntable fitted correctly. This promotes thorough, even cooking. A badly fitted turntable may rattle, may not rotate properly and could cause damage to the oven.

•The turntable rotates clockwise or anti-clockwise. The rotary direction may change each time you start the oven. This does not affect cooking performance.

Warning:

The accessories will become very hot whenever the top heater, bottom heater or convection symbols are lighted in the display and use thick oven mittens when inserting/removing the food or turntable from the oven to

PREVENT BURNS.

5