Sharp R-890N operation manual Multiple Sequence Cooking, sired power level by pressing the POW

<Multiple Sequence Cooking>

Preheating, Microwave Cooking, Convection Cooking, Grill Cooking or Mix Cooking can be programmed up to 4 automatic cooking sequences, switching from one variable power setting.

Note that POWER LEVEL must be entered first when programming sequence cooking.

*Suppose you want to cook for 10 minutes at 50% power level, cook 5 minutes at 100% power level and cook with Top Grill for 20 minutes.

Step	Procedure	Pad Order				Display
	Select microwave cooking and de-
1		POWER LEVEL
	sired power level by pressing the POW-
	ER LEVEL pad (for 50% power level
				x 3
	press three times).
2	Enter desired cooking time.
3	For second sequence, select micro-
	wave cooking and power level (for	POWER LEVEL
	100% power level press the POW-
	ER LEVEL pad once)
4	Enter desired cooking time for the
	second sequence.
5	For third sequence, press the
	GRILL pad.		GRILL	x 1
6	Enter desired cooking time.
	Press the INSTANT COOK/START
		INSTANT COOK
	pad.
			START
					The timer begins to count down to
					zero. When it reaches zero,
					the second sequence will be dis-
7					played and the timer will begin count-
					ing down to zero again.
					And then the third sequence will be
					displayed and the timer will begin count-
					ing down to zero. All indicators will go off
					and the oven will "beep" and END will be
					displayed. The cooling fan will remain
					on and NOW COOLING may be dis-
					played until the oven cavity has cooled.

WARNING:

The oven cavity, door, turntable, racks, dishes and especially bottom heater will become very

hot, use thick oven mittens when inserting/removing the food or turntable from the oven to PREVENT BURNS.

17