•An example where adjustment is required
When stretch material is sewn without using the differen- tial feed, the material will be wavy.
To make the material more smooth, adjust the feed ratio from 1.0 toward 2.0.
(The feed ratio required depends on the elasticity of the material.)
The more elastic the material, the further toward 2.0 the differential feed ratio should be set. Test sew with a scrap of the fabric to find the correct adjustment.
CAUTION
When sewing thick
Presser foot pressure
1
2 3
5 10mm (3/8 inch)
•The pressure of the presser foot can be adjusted by turning the pressure adjustment screw at the top left of this machine. Since this machine has already been adjusted to a pressure suitable for light to medium fabrics, no further adjustment is necessary except
when sewing on very heavy or very light materials.
4Usually, when sewing on very light materials, the presser foot pressure should be loosened. When
sewing very heavy materials, the presser foot pres- sure should be tightened.
1Pressure adjustment screw
2Less pressure
3More pressure
4Pressure adjustment screw
5(Standard height for medium material)
6