V. Sewing

Sewing flat fabric (for example, trial sewing)

(1)Raise the presser foot, and then place the fabric at the needle drop position.

(1)

(2)Lower the presser foot, turn the handwheel toward you a few times by hand, and then lightly step on the foot controller to start sewing.

(2)

NOTE:

When starting to sew or after changing the thread, in order for the needle thread to be on top of the presser foot, sew with it positioned under the presser foot when you begin sewing. If necessary, turn the handwheel toward you a few times by hand, and then cut the thread as shown in the illustration.

NOTE

Removing the fabric from the machine

(1)By hand, turn the handwheel toward you until the needle is at its highest position.

AThis is where the needle is at its highest position.

(1)A

(2)Raise the presser foot.

(2)

ENGLISH

15

Page 17
Image 17
Brother 2340CV operation manual Sewing flat fabric for example, trial sewing, Removing the fabric from the machine