EDITING A LABEL
Adding a New LineTo end the current line of text and start a new line, press the Enter key. A return mark appears at the end of the line and the cursor moves to the start of the new line.
• There is a maximum number of lines of text that can be entered for each tape width. A maximum of 7 lines can be entered for 24mm tape,5 lines for 18mm tape, 3 lines for 12mm tape, 2 lines for 9mm and 6 mm tape, and 1 line for 3.5mm tape.
•If you press the Enter key when seven lines already exist, an error message is displayed.
•To change the character attribute of each line, refer to “Setting Character Attributes by Each Line” on page 30.
Adding a New BlockTo create a new block of text/lines to the right of your current text, press the Enter key while holding down the Shift key. A mark will appear at the end of the block and the cursor moves to the start of the new block.
A maximum of 5 blocks can be entered in one label.
Moving the Cursor•Press the 
, 
, 
or 
key to move the cursor one space or line.
•To move the cursor to the beginning or end of the current line, hold down the Shift key and then press the 
or 
key.
•To move the cursor to the very beginning or end of the text, hold down the Shift key and then press the 
or 
key.
To insert additional text into an existing line of text, move the cursor to the character to the right of the position where you want to start inserting text and then enter the additional text. The new text is inserted to the left of the cursor.
Inserting a TabTo insert a tab space between the existing line of text, move the cursor where you wish to add a tab and press the Setup key to open the Setup menu, select "Tab" by using 
or 
keys, and then press the OK or Enter key. A 
mark appears to indicate the position which the tab space will be entered.
• To change the length setting of the tab, refer to “Setting Label Attributes” on page 35.
• The tab space can also be entered by pressing the Space key while holding down the Shift key.
| Entering and Editing Text |
24 | |
|
|