EDITING A LABEL

Setting Bar Code Parameters

1Press the Setup key to display the Setup menu, select “Bar Code Setup” using the or key, and then press the OK or Enter key.

The Bar Code Setup screen is displayed.

2Select an attribute using the or key, and then set a value for that attribute using the or key.

Characters may not appear below the bar code even when "On" is selected for "Under #", depending on the tape width being used, the number of lines entered, or the current character style settings.

3Press the OK or Enter key to apply the settings.

New settings are NOT applied if you do not press the OK or Enter key.

• The "C-Digit" (Check Digit) attribute is only available for the CODE39, I-2/5 and CODABAR protocols

•Press the Escape key to return to the previous step.

•Press the Space key to set the selected attribute to the default value.

•Refer to the Bar Code Settings table for a list of all available settings.

 

zBar Code Settingsz

 

 

Attribute

Value

Protocol

CODE39, CODE128, EAN-8, EAN-13,

GS1-128 (UCC/EAN-128), UPC-A, UPC-E, I-2/5 (ITF),

 

CODABAR

Width

Small

 

Large

 

Under#

On

(characters printed

 

Off

below bar code)

C.Digit

Off

 

On

(check digit)

(only available for the CODE39, I-2/5

 

and CODABAR protocols)

 

Creating a Bar Code Label

50