Brother 2730 Editing and Deleting a Bar Code

EDITING A LABEL

CODE128, GS1-128 (UCC / EAN-128)

Code	Special Character	Code	Special Character	Code	Special Character
0	(SPACE)	24		48	DC3
1		25		49	DC4
2		26		50	NAK
3		27		51	SYN
4		28	NUL	52	ETB
5		29		53	CAN
6		30	SOH	54	EM
7		31	STX	55	SUB
8		32	ETX	56	ESC
9		33	EOT	57
10		34	ENQ	58	FS
11		35	ACK	59
12		36	BEL	60	GS
13		37	BS	61
14		38	HT	62	RS
15		39	LF	63
16		40	VT	64	US
17		41	FF	65	DEL
18		42	CR	66	FNC3
19		43	SO	67	FNC2
20		44	SI	68	FNC4
21		45	DLE	69	FNC1
22		46	DC1
23		47	DC2

Editing and Deleting a Bar Code

•To edit the bar code data position the cursor beneath the bar code mark on the data entry screen and then open the Bar Code Input screen. Refer to “Entering Bar Code Data” on page 51.

•To edit the “Width” and “Under#” settings on a bar code already placed on the screen, position the cursor beneath the bar code mark on the data entry screen and then open the Bar Code Setup screen. Refer to “Setting Bar Code Parameters” on page 50.

•To delete a bar code from a label, position the cursor to the right of the bar code mark on the data entry screen and press the Backspace key.

	Creating a Bar Code Label
52