Error Message

Cause

Action

Init Unable XX

The machine has a mechanical

(For MFC-7360N and MFC-7460DN)

 

problem.

Received fax messages still in memory

 

 

will be lost when the machine is turned

 

 

off. See Transferring your faxes or Fax

 

 

Journal report on page 73 before

 

 

disconnecting the machine so you will

 

 

not lose any important messages.

 

 

Then, disconnect the machine from the

 

 

power for several minutes and then

 

 

reconnect it.

 

 

(For MFC-7860DW)

 

 

Disconnect the machine from the power

 

 

for several minutes, then reconnect it.

 

 

If the problem continues, call Brother

 

 

Customer Service.

 

 

 

Jam Duplex

The paper is jammed in the

(See Paper is jammed in the Duplex Tray

 

duplex tray at the back of the

(MFC-7460DN and MFC-7860DW)

 

machine.

on page 84.)

 

 

 

Jam Inside

The paper is jammed inside the

(See Paper is jammed inside the machine

 

machine.

on page 79.)

Jam Rear

The paper is jammed in the back

(See Paper is jammed at the back of the

 

of the machine.

machine on page 77.)

Jam Tray

The paper is jammed in the paper

(See Paper is jammed in the standard paper

 

tray of the machine.

tray on page 76.)

Limit Exceeded

The Page Limit set in Secure

Contact your administrator to check your

 

Function Lock 2.0 for your ID was

Secure Function Lock Settings.

 

reached.

 

 

 

 

Manual Feed

Manual Feed was selected as

Place a sheet of paper in the manual feed

 

the paper source when there was

slot. (See Loading paper in the manual feed

 

no paper in the manual feed slot.

slot on page 11.)

 

 

 

No Paper

The machine is out of paper or

Do one of the following:

 

paper is not properly loaded in the

Refill the paper in the paper tray and

 

paper tray.

 

press Start.

 

 

 

 

Remove the paper and load it again.

 

 

Then press Start.

 

 

If the problem is not resolved, the paper

 

 

pick-up roller may need to be cleaned.

 

 

Clean the paper pick-up roller. (See

 

 

Cleaning the paper pick-up rollers in

 

 

Appendix A of the Advanced User's

 

 

Guide.)

 

 

 

No Response/Busy

The number you dialed does not

Verify the number and try again.

 

answer or is busy.

 

No Toner

The toner cartridge is not installed

Pull out the drum unit. Take out the toner

 

correctly.

cartridge and then put it back into the drum

 

 

unit.

 

 

 

70