Brother 885-V35/V37 operation manual ESelect the stitch type, † When selecting a decorative stitch

SEWING BASICS ————————————————————————————————————————————

eSelect the stitch type.

† When selecting a decorative stitch

XThe screen containing the various stitches in the selected stitch type appears.

•To select a different stitch type, press

(Back key).

fSelect (Previousa stitch. page key) displays the previous

page, and (Next page key) displays the next page.

Memo

zWhen touching the screen with your finger is difficult, use the included touch pen.

ih

a	g
	f
b	e

c d

aSelects decorative stitch

bSets width and length

cSelects single stitch sewing

dSelects repeat sewing

eMakes horizontal mirror image

fDeletes a selected pattern

gUsed for checking combined pattern

hActivates automatic thread cutting

iActivates automatic reverse/reinforcement stitch

•To select a different stitch, press to remove the selected pattern.

gIf necessary, specify the settings for automatic reverse/reinforcement stitching and adjust the stitch length, etc.

•For details on sewing with each of the utility stitches, refer to Chapter3, "UTILITY STITCHES" which begins from page 72.

Note

zWhen a stitch is selected, the icon for the presser foot that should be used appears on the screen. Check that the correct presser foot is attached before starting to sew. If the wrong presser foot is installed, turn off the sewing machine, attach the correct presser foot, and then select the desired stitch again.

Memo

zFor details on setting automatic reverse/ reinforcement stitching etc., refer to "Useful Functions" (page 64).

zFor details on adjusting the stitch width, stitch length and thread tension, refer to "Setting the Stitch" (page 61).

■Selecting utility stitches

aFollow(page 51)steps. a to c in "Selecting stitching"

bSelect a stitch.

Memo

zThe utility stitch selection screen appears when you turn on the machine.

Example: When 11 is selected:

52