Brother 885-V35/V37 operation manual Embroidery step by step, Embroidering Neatly

————————————————————————————————————————————————————

Embroidery step by step

The basic steps for embroidery are as follows.

1	Presser foot attachment	Attach the embroidery foot "Q".
		For details on attaching the embroidery foot, refer to "Attaching the
		embroidery foot" (page 138).
		↓
2	Checking the needle	Use a needle matched to the fabric.
		For details on replacing the needle, refer to "Replacing the needle" (page
		41).
		↓
3	Embroidery unit attachment	Attach the embroidery unit.
		For details on attaching the embroidery unit, refer to "Attaching the
		embroidery unit" (page 141).
		↓
		For the bobbin thread, wind embroidery bobbin thread and set it in
4	Bobbin thread setup	place.
		For details on setting up the bobbin thread, refer to "Winding/Installing
		the Bobbin" (page 22).
		↓	4
		Attach a stabilizer material to the fabric, and hoop it in an embroidery
5	Fabric preparation	frame.
		For details on preparing the fabric, refer to "Preparing the Fabric" (page
		144).
		↓
6	Embroidery frame	Attach the embroidery frame to the embroidery unit.
	attachment	For details on attaching the embroidery frame, refer to "Attaching the
		Embroidery Frame" (page 148).
		↓
7	Pattern selection	Turn the power on, and select an embroidery pattern.
		For details on selecting embroidery patterns, refer to "Selecting
		Embroidery Patterns" (page 150).
		↓
8	Checking the layout	Check and adjust the size and position of the embroidery.
		For details on adjusting the layout and the size, refer to "Adjusting the
		layout and the size" (page 161).
		↓
9	Embroidery thread setup	Set up embroidery thread according to the pattern.
		For details on setting up the thread, refer to "Upper Threading" (page 31).

Embroidering Neatly 137