HP SL160Z Rack Airflow Rack 10000 series Cabinets Requirements, Rack Support, Factory Express

QuickSpecs

HP ProLiant SL160z Generation 6 (G6)

Standard Features

Rack Airflow	Rack 10000 series Cabinets
Requirements	The increasing power of new high-performance processor technology requires increased cooling
	efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for
	maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
	CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
	adequate airflow and to prevent damage to the equipment:
	Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow
	5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate
	airflow (equivalent to the required 64 percent open area for ventilation).
	Side: The clearance between the installed rack component and the side panels of the rack must
	be a minimum of 7 cm (2.75 inches)
	CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack.
	This arrangement ensures proper airflow. Using a rack without blanking panels results in improper
	cooling that can lead to thermal damage.
	NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation
	CD provided with the server, or to the server documentation located in the Support section at the
	following URL: www.hp.com/servers/SL160.
Rack Support	HP ProLiant SL160z G6 models have two different rail kits to choose from:
	10U bulk rail kit - Used to fit in HP 10000 series racks
	One 10U bulk rail kit will hold up to five z6000 chassis, thus ten SL160z G6 servers
	2U rail kit - Used to fit in 3rd party racks or to sell one z6000 chassis at a time
	One 2U rail kit will hold one z6000 chassis, thus two SL160z servers
	For additional information, please visit: www.racksolutions.com.
Factory Express	HP Factory Express offers configuration, customization, integration and deployment services for
Portfolio for Servers	HP servers and storage products. Customers can choose how their factory solutions are built,
and Storage	tested, integrated, shipped and deployed.
	Factory Express offers service packages for simple configuration, racking, installation, complex
	configuration and design services as well as individual factory services, such as image loading,
	asset tagging, and custom packaging. HP products supported through Factory Express include a
	wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP
	BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries
	and configurable network switches.
	For more information on Factory Express services for your specific server model please contact
	your sales representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise	The HP eConfigure Enterprise Configurator now provides factory default racking for our HP
Configurator	hardware portfolio. This approach is aligned with our strategic direction to meet the needs and
	expectations of our valued customers. If you require "custom" rack configuration, please contact
	HP's Customer Business Center or an Authorized Partner for assistance.
	http://www.hp.com/products/configurator

DA - 13385 Worldwide QuickSpecs — Version 1 — 6.15.2009 Page 10