HP SL160Z manual Technical Specifications

QuickSpecs

HP ProLiant SL160z Generation 6 (G6)

Technical Specifications

System Unit	Dimensions (H x W x D) 3.46 x 17.64 x 28.1 in (8.79 x 44.80 x 71.37 cm)
	(with bezel)
	Weight	Maximum	53.7 lb (24.35 kg)
	(approximate)	(all hard drives, power
		supplies, and processors
		installed)
	Input Requirements	Rated Line Voltage	90 to 132 VAC
	(per power supply)		180 to 264 VAC
		Rated Input Current	5. 8 Amps (at 100 VAC) to 2.9 Amps (at 200
			VAC)
		Rated Input Frequency	47 to 63 Hz
	BTU Rating	Rated Input Power	570W (at 100 VAC)
			565W (at 200 VAC)
		Maximum	-500W 1940 BTU / hr (at 100 VAC), 1920
			BTU/hr (at 200 VAC)
			460W - 1773 BTU / hr (at 120 VAC), 1715 (at
			240 VAC)
			750W - 2892 BTU / hr (at 120 VAC), 2797 (at
			240 VAC)
	Power Specifications	To review typical system power ratings use the HP Power Advisor which
		is available via the online tool located at URL: www.hp.com/go/proliant-
		energy-efficient
	Power Supply Output	Rated Steady-State	500 Watts (at 100 VAC),
	(per power supply)	Power	500 Watts (at 200 VAC)
		Maximum Peak Power	500Watts (at 100 VAC),
		(See Power	500 Watts (at 200 VAC)
		Specifications Tables)
	System Inlet	Operating	10° to 35°C (50° to 95°F) at sea level with an
	Temperature		altitude derating of 1.0°C per every 305 m
			(1.8°F per every 1000 ft) above sea level to a
			maximum of 3050 m (10,000 ft), no direct
			sustained sunlight. Maximum rate of change
			is 10°C/hr (18°F/hr). The upper limit may be
			limited by the type and number of options
			installed.
			System performance may be reduced if
			operating with a fan fault or above 30°C
			(86°F).
		Non-operating	-30° to 60°C (-22° to 140°F). Maximum rate of
			change is 20°C/hr (36°F/hr).
	Relative Humidity	Operating	10 to 90% relative humidity (Rh), 28°C
	(non-condensing)		(82.4°F) maximum wet bulb temperature, non-
			condensing.
		Non-operating	-30° to 60°C (-22° to 140°F). Maximum rate of
			change is 20°C/hr (36°F/hr).
	Altitude	Operating	3050 m (10,000 ft). This value may be limited
			by the type and number of options installed.
			Maximum allowable altitude change rate is
			457 m/min (1500 ft/min).
		Non-operating	9144 m (30,000 ft). Maximum allowable
			altitude change rate is 457 m/min (1500
			ft/min).
	Acoustic Noise	Listed are the declared A-Weighted sound power levels (LWAd) and

DA - 13385 Worldwide QuickSpecs — Version 1 — 6.15.2009 Page 31