——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

Memo

●When sewing with fine, cross-wound thread, use the small spool cap, and leave a small space between the cap and the spool.

c b

a

aSpool cap (small)

bSpool (cross-wound thread)

cSpace

hWhile holding the spool with your right hand, and then pass the thread under the thread guide.

a Thread guide

iPass the thread under the thread guide cover from the back to the front.

Hold the thread with your right hand so that there is no slack in the thread that is pulled out, and then pass the thread under the thread guide cover with your left hand.

jFeed the upper thread as shown in the illustration below.

1

kMake sure you guide the thread through the thread take-up lever from right to left as shown in the illustration below.

aThread take-up lever

Memo

●If the needle is not raised, the thread take- up lever cannot be threaded. Be sure to press the needle position button to raise the needle before threading the thread take-up lever.

aThread guide cover

25