dRaiselever.the presser foot using the presser foot
aPresser foot lever
•If the presser foot is not raised, the sewing machine cannot be threaded correctly.
eRaise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up, or press
(needle position button) (for models
gPass the thread under the thread guide cover from the back to the front.
Hold the thread with your right hand so that there is no slack in the thread that is pulled out, and then pass the thread under the thread guide cover with your left hand.
aThread guide cover
hFeed the upper thread as shown in the
equipped with the needle position button) once or twice to raise the needle.
or
aMark
bNeedle position button
fPull some thread off the spool, and then pass the thread under the thread guide.
illustration below.
4
aThread guide
91