——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

■Making a new combination of characters after sewing

Memo

●When you have finished sewing, the pattern No. of the first character in the current combination is shown on the LCD.

N

aSelect the first character of the new combination.

bPress the “+” side of (stitch width adjustment key).

N

aStitch width adjustment key

XThe old combination of characters is cleared from memory, and the pattern No. shown in the LCD is entered as the first character of a new combination.

cAdd characters by following the procedure

described in “Combining characters” (page 74).

Checking characters

You can check the characters in a combination with following method.

aPress the “+” or “-” side of (stitch length adjustment key) repeatedly.

This will display the characters that have been entered one by one on the LCD.

You can check the pattern No. and position of each character.

N

3

aStitch length adjustment key

bThe position of the selected pattern No.

cThe total number of characters in the combination

dSelected pattern No.

Deleting characters

You can delete characters from the combination.

aPress “-” side of (stitch width adjustment key) to delete the last character in the combination.

N

aStitch width adjustment key

XThe last character will be deleted.

N

Memo

●Repeat step a to delete more characters.

●You can only delete the last character in a combination.

75