——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

Button sewing

Buttons can be sewn on with the sewing machine. Buttons with 2 or with 4 holes can be attached.

aMeasure the distance between the holes in the button to be attached.

bRaise the presser foot lever, and then slide the feed dog position lever, located at the rear of

the machine on the base, to (to the right as seen from the front of the machine).

aFeed dog position lever

(as seen from the rear of the machine)

dPlacethe fabric.a button between the presser foot and

•When attaching four-hole buttons, first sew the two holes closest to you. Then, slide the button so that the needle goes into the two holes toward the rear of the sewing machine, and then sew them in the same way.

3

eSelect a stitch

. (With models not provided

with stitch

, select stitch .)

fAdjust the stitch width so that it is the same as the distance between the holes in the button.

gSet the stitch length to the shortest setting by pressing the stitch length adjustment key.

XThe feed dogs are lowered.

cAttach presser foot “M”.

1

aButton fitting foot “M”

55