fPosition the fabric with the front end of the buttonhole mark aligned with the red marks on the sides of the buttonhole foot, and then lower the presser foot lever.
1
2
A
2
aMark on fabric
bRed marks on buttonhole foot
•When lowering the presser foot, do not push in the front of the presser foot, otherwise the buttonhole will not be sewn with the correct size.
aDo not reduce the gap.
gPullpossible.down the buttonhole lever as far as
hGently hold the end of the upper thread in your left hand, and then start sewing.
Note
●If thick seams are being sewn and the fabric does not feed, sew with the coarser (longer) stitch.
| 3 |
X Once sewing is completed, the |
machine automatically sews reinforcement stitches, then stops.
iRaise the needle and the presser foot lever, remove the fabric, and cut the thread.
jRaiseposition.the buttonhole lever to its original
aButtonhole lever
The buttonhole lever is positioned behind the bracket on the buttonhole foot.
aButtonhole lever
bBracket
53