Brother 885V95, 885V97 operation manual Needle and presser foot section, Right-side/rear view

———————————————————————————————————————————————————

Needle and presser foot section

aButtonhole lever (page 90)

Lower the buttonhole lever when sewing buttonholes and bar tacks.

bThread guide disk (page 34)

Pass the thread through the thread guide disk when using the needle threader to thread the needle.

cNeedle bar thread guide (page 34)

Pass the upper thread through the needle bar thread guide.

dNeedle plate (page 70)

The needle plate is marked with guides for sewing straight seams.

eNeedle plate cover (page 176)

Remove the needle plate cover to clean the bobbin case and race.

fBobbin cover/bobbin case (page 28)

Remove the bobbin cover, and then insert the bobbin into the bobbin case.

gFeed dogs (page 92)

The feed dogs feed the fabric in the sewing direction.

hPresser foot (page 43, 54)

The presser foot applies pressure consistently on the fabric as the sewing takes place. Attach the appropriate presser foot for the selected stitching.

iPresser foot holder (page 45)

The presser foot is installed onto the presser foot holder.

Right-side/rear view

aHandle

Carry the sewing machine by its handle when transporting the machine.

bHandwheel (page 54)

Turn the handwheel toward you (counterclockwise) to raise and lower the needle to sew one stitch.

cEmbroidery card slot (page 156) Insert the embroidery card.

dUSB port (for a USB flash drive (USB flash memory)) In order to import patterns from a USB flash drive (USB flash memory), plug the USB media directly into the USB port.

eAir vent

The air vent allows the air surrounding the motor to be exchanged. Do not cover the air vent while the sewing machine is being used.

fMain power switch (page 17)

Use the main power switch to turn the sewing machine on and off.

gFoot controller jack (page 56)

Insert the plug on the end of the foot controller cable into the foot controller jack.

hPower supply jack (page 17)

Insert the plug on the power supply cord into the power supply jack.

iDrop feed lever (page 92)

Use the drop feed lever to lower the feed dogs.

Memo

￿Refer to pages 11 through 14 while you are learning to use your machine.

12