Configuration methods

Manual configuration for a Wi-Fi Direct network

If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network manually.

a Press a or b to choose Network.

2

Press OK.

 

b Press a or b to choose Wi-Fi Direct. Press OK.

c Press a or b to choose Manual. Press OK.

d When Wi-Fi Direct On? is displayed, press a to accept. To cancel, press b.

e When Other Network I/F will be disabled. Do you want to continue? aOK bCancel is displayed, press a to accept.

To cancel, press b.

f The machine will show the SSID name and Password for 2 minutes. Go to the wireless network settings page of your mobile device and input the SSID name and password.

g If your mobile device connects successfully, the machine shows Connected.

You have completed the Wi-Fi Direct network setup. For information on printing from your mobile device, you can download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center (http://solutions.brother.com/).

If the connection failed, see Troubleshooting uu page 21.

9