Press Menu.

Configuration methods

Configuring your network using Wi-Fi Direct for MFC-8710DW and MFC-8910DW

The Wi-Fi Direct network settings are configured from the control panel of the machine.

One push configuration using Wi-Fi Direct

2

If your mobile device supports Wi-Fi Direct, you can configure a Wi-Fi Direct network by following these instructions.

a

b Press a or b to choose Network. Press OK.

c Press a or b to choose Wi-Fi Direct. Press OK.

d Press a or b to choose Push Button. Press OK.

e When Wi-Fi Direct On? is displayed, press a or b to choose On and then press OK. To cancel, press a or b to choose Off and then press OK.

f When Other Network I/F will be disabled. Do you want to continue? is displayed, press 1 to accept.

To cancel, press 2.

g Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when Activate Wi-Fi Direct on other device. is displayed.

Press OK on your machine. This will start the Wi-Fi Direct setup. To cancel, press Clear.

h

i

Do one of the following:

When your Brother machine is the G/O (Group Owner), your mobile device will try to connect to the machine directly.

When your Brother machine is not the G/O (Group Owner), the machine will display available device names to configure a Wi-Fi Direct network with. Choose the mobile device you want to connect to and press OK. You can re-search for available devices by pressing Rescan.

If your mobile device connects successfully, the machine shows Connected.

You have completed the Wi-Fi Direct network setup. For information on printing from your mobile device or scanning to your mobile device, you can download the

Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center (http://solutions.brother.com/).

If the connection failed, see Troubleshooting uu page 21.

10