Press a or b to choose Network. Press a or b to choose Wi-Fi Direct.
Press a or b to choose Group Owner and then press On. Press a or b to choose PIN Code.

Configuration methods

Configuration using the PIN Method of WPS (Wi-Fi Protected Setup)

If your mobile device supports the PIN Method of WPS (Wi-Fi Protected Setup), you can configure a Wi-Fi Direct network by following these instructions.

a Press Menu.

2

b c d e

f When Wi-Fi Direct On? is displayed, press On to accept. To cancel, press Off.

g When Other Network I/F will be disabled.Do you want to continue? is displayed, press OK to accept.

To cancel, press Cancel.

h When Activate Wi-Fi Direct on other device.Then Press OK. is displayed, activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for instructions) and then press OK on your machine. This will start the Wi-Fi Direct setup.

To cancel, press Stop/Exit.

i The machine will wait for a connection request from your mobile device. When PIN Code appears, input the PIN displayed on your mobile device to the machine.

Press OK.

j If your mobile device connects successfully, the machine shows Connected.

You have completed the Wi-Fi Direct network setup. For information on printing from your mobile device or scanning to your mobile device, you can download the

Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center (http://solutions.brother.com/).

If the connection failed, see Troubleshooting uu page 21.

19