5 - 8 Setup Receive
Setup Delayed Polling Receive
You can set the machine to begin Polling Receive at a later time.
1
Press Menu/Set, 2, 7.
2
Press or to select TIMER.
Press Menu/Set.
3
The screen prompts you to enter the time you want to begin
polling.
4
Enter the time (in 24-hour format) you want to begin polling.
For example, enter 21:45 for 9:45 PM.
5
Press Menu/Set.
6
Enter the fax number you are polling.
7
Press Fax Start.
The machine makes the polling call at the time you entered.
Sequential Polling
The machine can request documents from several fax units in a
single operation. You just specify several destinations in Step 4.
Afterwards, a Sequential Polling Report will be printed.
1
Press Menu/Set, 2, 7.
2
Press or to choose
STANDARD, SECURE or
TIMER.
Press Menu/Set when the screen displays the setting you
want.
3
If you selected STANDARD, go to Step 4.
If you selected SECURE, enter a four-digit number and
press Menu/Set, and then go to Step 4.
If you did not enter the correct secure code, you will
receive the following message DISCONNECTED.
If you selected TIMER, enter the time (in 24-hour format)
you want to begin polling and press Menu/Set, and then
go to Step 4.
4
Specify the destination fax machines, which you wish to poll
by using One-Touch, Speed-Dial, Search or a Group. For
example, for One-Touch 3 and Speed-Dial location 09, press
One-Touch Dial key 3, Search/Mute, # and 09. (See How to
dial on page 6-1.)
5
Press Fax Start.
6
The machine polls each number or group number in turn for a
document.
If the other fax machine that you are calling has not been
set-up for Polling, you will receive message
CONNECTION FAIL.
You can set up only one Delayed Polling.
7.POLLING RX
POLLING:STANDARD