Control Panel
55
4
Go button 4
The Go button has the following functions:
Cancel printing
Cancel only the printing job:
While printing press the Go button for about 4 seconds until all the LEDs light up. The Ready and Error
LEDs will flash as the job is being cance led.
Cancel all the received jobs:
To delete all jobs, press the Go button for about 4 seconds until all the LEDs light up and then release it.
Press the Go button again. The Ready and Error LEDs will flash as the job is being canceled.
Wake-up
If the printer is in sleep mode, press the Go button to wake the printer up and go to the Ready state.
Error recovery
If there is an error, the printer will recover automatically from some errors. If an error is not automatically
cleared, press the Go button to clear the error, and then continue to use the printer.
Form feed
If the blue Ready LED blinks for a long time, press the Go button. The printer will print any d ata that is left
in the printer’s memory.
Reprint
To reprint the last document, press the Go button for about 4 seconds until all the LEDs light up and then
release it. Within 2 seconds press the Go button the number of times you want to reprint. If you don’t press
the Go button within 2 seconds, a single copy w ill be printed.