CHAPTER 5 MAINTENANCE
5-57
Note
When you select the fonts through your software or with a command, note
the following:
• You do not need to be concer ned about the Font control panel setting.
The software or command overrides the printer setting.
• Be sure to install a font card th at has your desired fonts. The printer
automatically selects the font that has exactly the same or similar
characteristics as those you have set through the software or with a
command. If the installed font card does not happen to have a font of
similar characteristics, the printer will print in an unexpected font.
To select fonts with the Control Panel setting menu, follow these basic
steps:
1. Press any of the Menu buttons (+, –, Set or Back) to take the printer Off
Line.
2. Press + or – until “INFORMATION” appears on the LCD display.
3. Press Set to proceed to the next menu level, and then press + or – until
“PRINT FONTS” appears.
4. Press Set to print the list of optional fonts (Fig. 5-77).
5. Find the Font Number on the list.