CHAPTER 5 MAINTENANCE
5-63
R
R
RA
A
AM
M
M
E
E
EX
X
XP
P
PA
A
AN
N
NS
S
SI
I
IO
O
ON
N
N
This printer has 64 Mbytes of standard memory and 3 slots for optional
expansion memory. The memory can be expanded by 384 Mbytes by
installing commercially available dual in-line memory modules (DIMMs).
(The standard memory fitted can vary depending on the printer model and
the country.)
This printer uses memory modules that are:-
100 pins, no-parity, SDRAM with 64Mbit or more.
This printer is not compatible with Extended Data Output (EDO) DIMM, or
DIMM that uses 16Mbit SDRAM.
The following capacity of DIMM can be installed:
<Europe>
•16 Mbyte BUFFALO TECHNOLOGY 12323-0001
•32 Mbyte BUFFALO TECHNOLOGY 12324-0001
•64 Mbyte BUFFALO TECHNOLOGY 12325-0001
•128 Mbyte BUFFALO TECHNOLOGY 12326-0001
<US>
•16 Mbyte TECHWORKS 12456-0001
•32 Mbyte TECHWORKS 12457-0001
•64 Mbyte TECHWORKS 12458-0001
•128 Mbyte TECHWORKS 12459-0001
In general, the DIMM must have the following specifications:
Type: 100 pin and 32 bit output
CAS Latency: 2
Clock Frequency: 66Mhz or more
Capacity: 16,32,64 or 128 Mbyte
Height: 46mm (1.8 inches) or less
Parity: NONE
Dram Type: 64 M bit SDRAM 4 Bank SDRAM can be used.